产品系列 > 快速电路板制作系统 > 软件 > CircuitPro PL

Menu
5166-circuitpro-pl

LPKF CircuitPro PL


Software Suite for All LPKF ProtoLaser


您的位置: 产品系列 > 快速电路板制作系统 > 软件 > CircuitPro PL
 
描述
LPKF is one of the pioneers in micro-material processing with the laser. LPKF processes set the standard, for performance as well as quality, in various areas of medical technology, electronics and the automotive industry. The many years of experience in system development and applications with customers are reflected in the CircuitPro software – now also in a specific version for the LPKF ProtoLaser.

5171-lpkf-circuitpro-software
The capability of a laser structuring system stands
and falls with the software that controls it.
A Faster Way to the Final Product
LPKF CircuitPro has been improved continuously to fit all of the users needs.
The capability of a laser structuring system stands
and falls with the software that controls it.
The task of modern CAM software? It should implement the layout ideas of the developer as simply as possible in control data. Development of uniform machine software at LPKF targeted two aspects in particular: uniform, easy operation and at the same time a high capacity in taking over even demanding layouts.

Faster Results with the Computer and Laser System
The new LPKF CircuitPro software leads to extensive automation of routine tasks and optimization of calculation processes. Some of the calculations now run up to ten times faster on the same computers. And there are also benefits for the practical processing time. Due to improved path routines, some position changes and cutting processes have been simply omitted.

Special Areas

CircuitPro PL has taken a large development step through the introduction of special areas. The software identifies areas with fine structures and removes the copper layers between the conductor traces by means of a process that runs parallel to these structures.

Compared to the previous version, the danger of local substrate damage and the duration of the rub-out process are reduced. At the same time, particularly fine structures are treated with care.

Island Hopping
By means of stitching – seamless connection of scan fields – the laser systems can also structure large circuit boards. Until now stitching was limited to square fields. The new CircuitPro PL software chooses the limits so that they run on existing structural elements. Separate stitching cuts are thus reduced and precision increased over the entire board.

• Intuitive operation
• Quicker calculation of machine data
• „Special areas" for greater precision
• Uniform LPKF core software

技术参数
系统配置
Minimum requirements: Recommended requirements:
• Dual-Core CPU with at least 2.6 GHz • Quad Dual Core with at least 2.9 GHz
• 4 GB RAM • 12 GB RAM
• 5 GB free disk space • 6 GB free disk space
• Dedicated graphics card with at least 512 MB
non-shared memory; at least 1 024 x 768 px
• Dedicated graphics card with at least 1 GB DDR3
non-shared memory; at least 1 680 x 1 050 px
• 2 x USB 2.0 • 2 x USB 2.0
• Windows XP SP3 (32 bit), Windows Vista SP 1
(32/64 bit), Windows 7 (32/64 bit)

图片
5130-circuitpro-pl
This is an example of the previous version of the rub-out area.
5131-circuitpro-pl
Processing as a special area. Processing parallel to the conductor tracks geometries treats fine structures with care and increases precision.
5132-circuitpro-pl
More layout data are seamlessly and in a design-dependent fashion optimized and connected.


5129-circuitpro-pl
LPKF CircuitPro PL offers easy and intuitive operation.

更多资讯


LPKF 集团网址
LPKF WeldingQuipment
LPKF SolarQuipment
LaserMicronics
ZelFlex Stretching Frames

LPKF 销售网络
Europe
America
Asia
Africa
Australia
English
Deutsch
Español
Français
Русский
Slovenščina
日本語
新闻通讯 
优酷  YouKu
RSS 
<